themadhippy

Theres several midi to DMX convertors available,along with diy ardunio projects .If your dimmer packs take an analogue input the old puslar universal interface might be worth searching for.

In the name of community sprit,I would like to help the government out,I wont charge a consultancy fee or any other charges,you can have this one for free. Dear mps and civil servants,this is an elbow and this is an arse I hope that helps clears the confusion up,if you need any more help do get in touch

could always go the way of the pros and put it on track, just hope the soloist don't stumble

All of the main component stockist (RS,cpc,arrow,digikey mouser etc) have them for £1-£2 That part is cheap,what will sting is the cost of p+p on small orders,you could risk looking on ebay,but no guarantee what your buying is what's in the chip

if you can increase the ole budget https://www.rigol-uk.co.uk/product/rigol-ds1054z-50mhz-digital-oscilloscope/ been around for a few years,but still pretty good bang for buck. few quid more,but newer and slightly better specs https://siglent.co.uk/products/digital-oscilloscopes/siglent-sds1000x-u-series-digital- oscilloscopes/ Ive got my eye on one of theses to replace my old trusty analogue instek,but other expenses keep getting in the way

Ah memorys of a safety chain through the back handle and round the bar to keep the dam things from drooping

maybe it meant to be lime

hire a proper xenon strobe

Its flints,the purveyor of sky hooks, so a little humour is expected

Had a similar fault on a soundcraft 200b,it was down to a 10 ohm resistor,buggered if I can remember were it was in the circuit though

you've obviously never heard the term "bar tab"

youll be able to buy a pint in my local micro pub,no cards accepted cash only and ale served straight from the barrel

Ah I'd misremembered the regs change in april and thought it covered all generators,however digging into the actual regs it says considering all most all hospitals have a shop or 2 and many treat private patients how can they not be classed as a commercial premises?

nothing unusualt here,back when I breifly worked in the nhs in the 80's each of the gennys would be run up with a full load once a year as part of the general maintenance routine .Of course now we cant be putting red diesel in the tanks those same gennys are going to be much more expensive to run . cynical me reckons its all a con,let the fan and feces collide then at the last minute dont trust will announce shes made an agreement ,it will cost the tax payer £7 billion but the power will be staying on.Dont forget to vote for me for saving christmas

Ok what am I missing? what do they offer over zebedee's

Does the budget extend to lab gruppen? https://www.labgruppen.com/product.html?modelCode=P0D5M

well if there a pile to do

finally we broke the conservation of energy rules that have plagued science for years

If you can find one,the microsoft intellimouse track ball,as found with many strand 300's,is well worth the search.unlike many of the newer trackballs,the ball is held captive and cant escape every time you knock it

As your a school ask the science department if they have some co2 lying about,added bonus they should know about using the stuff safely.Basically all you need is a container of warm water to slowly drop the solid co2 into,and maybe a fan to direct the fog

Bit small for beams,but for smaller stuff these bungys are great for holding cabling and lightweight stuff up, much quicker to rig and derig than tying bows in para cord

I'll throw another into the pile,inspired audio.co.uk/ owned by chris scot,formerly of logic.Used a few bits of theirs and it makes an impressive amount of noise for its size

imagine the the revues. The audio was excellent you could almost taste the brown sound

pretty sure ive seen phono (rca for american viewers) sockets used in the past

could you modify the headset so the speaker is a loop,assuming there hearing aid is loop compatable