Jump to content

Dune DL FOG-1502 User Manual

Don Allen

Recommended Posts

I have a Dune DL FOG-1502 https://www.ccslightsound.com.au/dune-1500w-smoke-machine-dmx512-timer-remote that is not responding to DMX channel 1 fog level, but when the DMX is present, you cannot use remote control unit, so the DMX chip appears to be OK.  I cannot find a manual, the DIP switch has 10 switches, the tenth one has a Star. I have tried it in both positions, but it does not appear to be  DMX enable. Any suggestions ?

FOG_1502 Rear (2).jpg

Link to comment
Share on other sites

In addition to the other suggestions, you might try inverting the settings on the switches so that switch 1 is off and all the others on for channel 1.

Another possibility is that you need to add 1 to the switches to get the address so as shown that might be address 257. But you have to try all of these possible settings in all the permutations. Using the desk to set 1-512@FULL and, if it works, doing a binary chop to find out what channel it's on is also a good idea.

Edited by DrV
More suggestions
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.