Gerry Posted September 27, 2018 Share Posted September 27, 2018 I'm pretty sure I saw something on here, or maybe somewhere else, about a rewirable IEC C14 M to F adaptor.I'm about to buy some LED Pars but they have an attached mains lead and plug.Would be handy to remove the plug and put one of these M to F adaptors on so that I can daisy chain them.CheersGerry Link to comment Share on other sites More sharing options...
Brian Posted September 27, 2018 Share Posted September 27, 2018 I don't think we've ever found a rewirable part. I did track down a manufacturer who would make a load of moulded leads in any choice of cable/length but, IIRC, the MOQ was several hundred pieces. Link to comment Share on other sites More sharing options...
p.k.roberts Posted September 27, 2018 Share Posted September 27, 2018 If I recall correctly, the least worst option we came with was these; https://cpc.farnell.com/pro-power/hp8210/splitter-iec-c14-to-2x-c13/dp/PL15013?st=iec%20splitter Link to comment Share on other sites More sharing options...
Don Allen Posted September 27, 2018 Share Posted September 27, 2018 I replace the male and female leads that were supplied with some of the led par's I buy with a 2m piggy back plug black extension lead cut in half, to give me a daisy chain lead that can also be used as a piggy back. When I open up the led par I also correct any non Australian standard wiring errors. Not an option available to most consumers. Link to comment Share on other sites More sharing options...
sunray Posted September 27, 2018 Share Posted September 27, 2018 https://cpc.farnell.com/pro-elec/pe01093/lead-uk-plug-to-2x-iec-c13-skt/dp/PL13332?CMP=CPC-ebooks-BIGBOOK2015 Link to comment Share on other sites More sharing options...
themadhippy Posted September 27, 2018 Share Posted September 27, 2018 another option https://www.tlc-direct.co.uk/Products/KBJB003.html add connectors of choice Link to comment Share on other sites More sharing options...
MarkPAman Posted September 28, 2018 Share Posted September 28, 2018 I've got a few lights that don't have a mains pass through, with something like these "permanently" attached with self amalgamating tape / cable ties. Link to comment Share on other sites More sharing options...
Gerry Posted September 28, 2018 Author Share Posted September 28, 2018 Thanks for the replies.I have a quite a few of these https://cpc.farnell.com/pro-power/hp8210/splitter-iec-c14-to-2x-c13/dp/PL15013?st=iec%20splitter so that, currently, seems the least worst option.CheersGerry Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.