Nicktaylor Posted November 7, 2014 Share Posted November 7, 2014 I have a pair of 150 smoke machines and a pair of Neutron Hazers. I only have one DMX interface. Has anyone tried using a Y lead to split the Le Maitre protocol out of the interface so I could run a pair of Smoke or Haze. I imagine it might come down to signal level, its not like splitting DMX as such, I dont think Link to comment Share on other sites More sharing options...
themadhippy Posted November 8, 2014 Share Posted November 8, 2014 Le maitre protecall?thought they were just a single channel dmux kicking out 0 to 10v Link to comment Share on other sites More sharing options...
Jivemaster Posted November 8, 2014 Share Posted November 8, 2014 If the book doesn't help then LeMaitre would likely give you an answer via their Mitcham number. Ask them! Link to comment Share on other sites More sharing options...
Wingwalker Posted November 10, 2014 Share Posted November 10, 2014 Why would you split them? just set the same address for both......... Or am I missing something here??? Link to comment Share on other sites More sharing options...
dosxuk Posted November 10, 2014 Share Posted November 10, 2014 Or am I missing something here??? I only have one DMX interface. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.