jonny_av Posted April 19, 2016 Share Posted April 19, 2016 Hi Guys, If I have a chain of speakers connected in a 100v line to an amplifier, can I put a 100v line volume control (such as this) after some speakers and before another pair, so that I can have control over that pair of speakers irrespective of the previous speakers in the chain? Many thanks Link to comment Share on other sites More sharing options...
boatman Posted April 19, 2016 Share Posted April 19, 2016 I have no direct experience of that control, but the manual for it is here. It shows that the output is still a 100V line. It should be possible to attach more than one speaker to one controller as long as the total load of the controller isn't exceeded. Link to comment Share on other sites More sharing options...
johnhuson Posted April 19, 2016 Share Posted April 19, 2016 It will work absolutely fine as you describe. You could also make a Y-split arrangement at the input to that attenuator and carry on down the line without having any affect. Link to comment Share on other sites More sharing options...
jonny_av Posted April 19, 2016 Author Share Posted April 19, 2016 Perfect, this is as I thought, I just wanted to double check. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.