Teddy Posted September 26, 2013 Share Posted September 26, 2013 I'm going to have to ask a moronically simple question :( and one to which I should know the answer I need 12 Par 64's,6 in Lee 0136 in Lee 103 How much Gel do I need to order for standard par64 gel frames?? Link to comment Share on other sites More sharing options...
Gerry Posted September 26, 2013 Share Posted September 26, 2013 The answer to all your questions is here, http://www.stagepoint.co.uk/Lantern_Guide.htm, amongst many other places.CheersGerry Link to comment Share on other sites More sharing options...
david.elsbury Posted September 26, 2013 Share Posted September 26, 2013 I've found that you can squeeze in 5 cuts (240mm wide rather than 255mm wide) across a roll (1200mm?)of Lee or CJ gel - the gel sits slightly inside the frame but never had an issue. Means rather less wastage than cutting 4 cuts and throwing the rest. For what it's worthDavid Link to comment Share on other sites More sharing options...
indyld Posted September 26, 2013 Share Posted September 26, 2013 I've found that you can squeeze in 5 cuts (240mm wide rather than 255mm wide) across a roll (1200mm?)of Lee or CJ gel - the gel sits slightly inside the frame but never had an issue. Just to tidy this up, I assume David means 5 x 2 as, yes, you can get 10 cuts of PAR64 out of a sheet of Lee IF you cut them a little small. Or 8 if you cut them full size. Link to comment Share on other sites More sharing options...
david.elsbury Posted September 26, 2013 Share Posted September 26, 2013 Yep, we seem to have rolls over here rather than sheets - so I base anything on that :) By my maths, 5 across gives you 20 cuts per meter. Anyway :)David Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.