xme Posted July 1, 2010 Share Posted July 1, 2010 http://www.pulsarlight.com/Products/LEDLig...73/Default.aspx check these Link to comment Share on other sites More sharing options...
Nick LX Posted September 4, 2010 Author Share Posted September 4, 2010 Sorry to bring this old topic back up. I've drawn an example of what I was thinking, and was wondering a few things. http://i51.tinypic.com/voa2q9.jpg 1) The current drawing allows 300mm between the evenLED panel and the cyc (as per the Martin manual). What type of cloth would you use (given this is back projection). 2) Is it possible, by using diffusing plexiglass, to place the evenLED panels closer to the flat? Does anyone have any recommendations of distance between the panels and the plexiglass, and also which plexiglass to use? 3) What is the list price for hiring the evenLED panels for a week? Am I correct in thinking that only Whitelight stock them? Cheers Link to comment Share on other sites More sharing options...
scanman0_1 Posted September 4, 2010 Share Posted September 4, 2010 Have a look at www.guybarrett.com Is this what you had in mind? he made them himself from ply, they are no more than 6" deep, have a heavy frost sheet on the front to defuse the light. The light source is a AMERICAN DJ PUNCH LED PRO about £90 from EBay. They are very effective. Link to comment Share on other sites More sharing options...
Jamtastic3 Posted September 4, 2010 Share Posted September 4, 2010 Really cheap option.... Ply frame with a frosted shower curtain ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.