ryandell Posted September 28, 2006 Share Posted September 28, 2006 Hi allJust wondering my friend asked me to mkae him a wireless guitar system and he has a wireless beltpack transmitter and receiver. Wondering if I got an interconnecting lead would this be enough. ThanksAny other suggestions of how to make one are appreciated Ryan Link to comment Share on other sites More sharing options...
Simon Lewis Posted September 28, 2006 Share Posted September 28, 2006 Ryan, I presume you are referring to a beltpack that would normally take a lapel mic? If so, the answer is probably "no" as the input impedance would be on the low side, and the sensitivity too great. However, some beltpacks are wired to accept both mic and instruments, using different pins on the connector. try looking at the manufacturer's information... Simon Link to comment Share on other sites More sharing options...
ryandell Posted September 28, 2006 Author Share Posted September 28, 2006 Hi Simon Ok I see where you are coming from and yes it is from a beltpack. I will try and get one with an instrument input Thanks Ryan Link to comment Share on other sites More sharing options...
Jivemaster Posted September 28, 2006 Share Posted September 28, 2006 Also the simple ones put the bias volts for the electret down the screened cable and may use the cable as the antenna. Suitable TRs have a high impedance input available on specific pins or by links inside. Link to comment Share on other sites More sharing options...
BlueShift Posted September 29, 2006 Share Posted September 29, 2006 if you could tell us the model of the beltpack system that would help... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.