braxton Posted June 25, 2008 Share Posted June 25, 2008 I am looking for a schematic for a Clear-Com type beacon/flasher. I don't need the buzzer option, just the strobe. Any suggestions? Braxton Link to comment Share on other sites More sharing options...
Brian Posted June 25, 2008 Share Posted June 25, 2008 Any good for you? This one will light up multiple LEDs, I use the big dome topped 20mm ones. Link to comment Share on other sites More sharing options...
Simon Lewis Posted June 25, 2008 Share Posted June 25, 2008 Brian, Previous threads have suggested that Clearcom systems are probably compatible with Tecpro. Have you successfully used this beacon circuit with Tecpro comms? Thanks, Simon Link to comment Share on other sites More sharing options...
Brian Posted June 25, 2008 Share Posted June 25, 2008 Have you successfully used this beacon circuit with Tecpro comms?Yes. Link to comment Share on other sites More sharing options...
boatman Posted June 25, 2008 Share Posted June 25, 2008 This thread from a year or so back, might help. Also look at this page but be aware that this project contains mains voltages and should not be attempted if you don't feel confident with your abilities. Link to comment Share on other sites More sharing options...
braxton Posted June 25, 2008 Author Share Posted June 25, 2008 Looks great - Thanks for the reply. I will let you know how it turns out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.