Theatre Solutions Posted February 1 Share Posted February 1 SAXLIFT scissor lift IDL2000 – 1300mmX850mm. Closed height 360mm to total height1780mm (1420mm travel in 28sec). 2000kg capacity. Run by 3 Phase motor powering 2x hydraulic rams, it is reasonably quiet in operation from a hand controller with 6m lead. Lift has motion limit switches but the original top platform has been removed. For our production, a plywood top 950mmx 1800mm with a box steel frame was constructed as our table top. This can be supplied with the lift if required for no extra charge or an OEM part can be sourced from SAXLIFT. I purchased the lift in 2021 for a single production that Christmas. The lift was removed from a commercial business unused after commissioned and found to be unsuitable. Unfortunately there is no 3 phase power supply at the storage unit to demonstrate this working so the lift is sold as seen. This lift was over £3000 new I am looking to recover just £500. It will need a large van or vehicle with a load capacity to take it’s weight of 480kg. We can fork-lift load to your vehicle. Thanks for reading and please contact me through Blue-room for any further details. Lift is in Morecambe, Lancs. Link to comment Share on other sites More sharing options...
Recommended Posts