Identification of a pin connector

[DanSteely]

Hi All,

I am constantly repairing PCB's that have pin and socket connectors that I'd like to identify.
The pictures show a typical example.
The pins, which are square in section, measure 1.15mm in diameter.

What I'm looking for is a small kit of female crimps, crimp housings as well as male versions.

I have a similar kit of what I think are generally referred to as 'Dupont' connectors and are typically used with Arduino's, etc.

The connectors I'm looking for are substantially larger.  

Many thanks.

[boatman]

They look like JST VH series (3.96mm pitch). Try this link:

https://www.mattmillman.com/info/crimpconnectors/common-jst-connector-types/#vh

[DanSteely]

Many thanks.  

[boatman]

Did you measure the pin pitch on the PCB headers?

[DanSteely]

Sorry for the delay. Yes I did. The centres are 3.96mm.

[boatman]

No problem, it looks like JST VH series will fit.

[Geo23]

Hi there,

I think your best bet would be to search for this

Pin Header, Wire-to-Board, 3.96 mm, 1 Rows, N Contacts, Through Hole

Where 'N' = number of contacts required.

Farnell do a good range but you may need to buy larger quantities than you need.

For example 

https://uk.farnell.com/amp-te-connectivity/1-1123724-2/connector-header-3pos-1rows-3/dp/3398192

Alternatively 'CPC Farnel'l are perhaps more suited to smaller quantities, the link is only a starting point, a similar search would provide the pin numbers you need for different boards.

https://cpc.farnell.com/molex/26-60-4040/header-tht-vertical-3-96mm-4way/dp/CN18481?st=pin headers 3.96mm

Hope this helps.

 

Edited February 19, 2023 by Geo23
added spacing in text

[Geo23]

[Geo23]

[Don Allen]

It is handy to get kits like these JST XHP connectors  but I had to make my JST VH kit by buying from RS and buying storage cases  to suit. If you search for JST VH KITWS UK you will find sites selling individual pin sizes e.g. 2 pin or 3 pin.