Fat Fog Fixture control not working advice please

[civic1975]

Fat Frog working OK except for the Fixture control section is non functional.

 

I am hoping that I have missed something in the operating procedure but feel it is a hardware issue.

 

 

I have replaced the battery however it was not working prior to this.

 

 

Anyone have an idea?

[vinntec]

Depends on what you mean by non-functional. If it is the whole fixture panel completely dead, there is a single ribbon cable connecting it to the main board IIRC which would be worth checking in case it has become unseated?

 

Has it worked before or is this the first time you are trying to patch a fixture? If so, it is a long time since we had an FF but have you tried patching one of the dimmers as a fixture and check if that works?

 

Also, remember that if you are patching LEDs you normally need both intensity AND colour before they light up.

 

That's about all I can think of.

Edited April 14, 2020 by vinntec

[Edward- Z88]

Hello,

 

This sounds like a hardware issue.

 

Feel free to drop us an email to support@zero88.com, and we'll be able to advise.

 

If you have any questions let me know.

Edward

Edited April 15, 2020 by Edward- Z88

[civic1975]

Hello,

 

This sounds like a hardware issue.

 

Feel free to drop us an email to support@zero88.com, and we'll be able to advise.

 

If you have any questions let me know.

Edward

 

Edward,

 

Thanks, I'll drop you an email.