Brian Posted May 18, 2019 Share Posted May 18, 2019 Anyone know what the proper DC power connector on the back of a ULXS4 receiver is? Link to comment Share on other sites More sharing options...
Mixermend Posted May 18, 2019 Share Posted May 18, 2019 You need a 15 volt DC power supply, with around 550mA output - connected to a locking ring type DC connector, pin size 2.1mm and outer barrel size 5.5mm (very standard fortunately). Positive to the centre pin and negative to the outer. Link to comment Share on other sites More sharing options...
Brian Posted May 19, 2019 Author Share Posted May 19, 2019 Thanks, turns out it's the chassis socket which was causing the problem. The wiping side contact had been bent and pushed towards the far end of the socket. All I need to do now is find the right part to replace it. I could fit any old 2.1x5.5 socket (I have those on the shelf) but I'd like to keep the unit as close to factory standard as possible. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.