revbobuk Posted April 13, 2018 Share Posted April 13, 2018 Guys - I've got to attach some LED PARS to installed tubing which is 40mm o/d - can anyone recommend a half coupler or hook clamp or similar that will do the job but won't break the bank? Link to comment Share on other sites More sharing options...
timsabre Posted April 13, 2018 Share Posted April 13, 2018 Doughty do a 38mm one T58970 which I would have thought would fit 40mm OK https://www.thomann....oupler_38mm.htm You can no doubt get cheaper chinese ones but I have always found the wingnuts/bolts tend to be rubbish Link to comment Share on other sites More sharing options...
Don Allen Posted April 13, 2018 Share Posted April 13, 2018 I use the CLAMPT50 from Event Lighting, for 38 to 51mm pipe, excellent for overhanging. Also good for heavy fixtures. Should be something similar in your area. Link to comment Share on other sites More sharing options...
TomHoward Posted April 13, 2018 Share Posted April 13, 2018 There's a Stairville ULC03 hook clamp from thomann that claims it should fit, and looks shocking quality but is only £2.50 a clamp. Link to comment Share on other sites More sharing options...
jamieshurlock Posted April 15, 2018 Share Posted April 15, 2018 I have a load of 40mm hook clamps for sale, be cheaper than new obviously, I can dig them out tomorrow and see how many I have... how many are you after?thanks,jamiesales@jamiesmagictorch.co.uk Link to comment Share on other sites More sharing options...
revbobuk Posted April 16, 2018 Author Share Posted April 16, 2018 I have a load of 40mm hook clamps for sale, be cheaper than new obviously, I can dig them out tomorrow and see how many I have... how many are you after?thanks,jamiesales@jamiesmagictorch.co.uk 8. If they are hook clamps, I wouldn't want them very long, as I don't have a lot of vertical space. 'Normal' proportions should be OK though. Link to comment Share on other sites More sharing options...
jamieshurlock Posted April 16, 2018 Share Posted April 16, 2018 I have enough of them, I have some pics but cant get access to my dropbox, if you send me an email address I can send to you. they're 100mm long maybe less, 60mm wide (roughly) by maybe 20mm, smaller than a standard c-clamp anyway and the inside is 40mm to fit the pipe obvs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.