BobJ Posted April 1, 2018 Share Posted April 1, 2018 We have several Chauvet CORE Par 80's and 40' which do a great job. Only problem is some light spill. Any ideas on how we could Barn Door these? Link to comment Share on other sites More sharing options...
sandall Posted April 1, 2018 Share Posted April 1, 2018 Blackwrap (however you spell it)? Link to comment Share on other sites More sharing options...
BobJ Posted April 1, 2018 Author Share Posted April 1, 2018 Blackwrap (however you spell it) Now that does looks both interesting and inexpensive - thank you. Form what I can see one just wraps this around the device and secures it to form a snoot and then models it to reduce the scatter in unwanted directions.I'm ordering some to try out, Link to comment Share on other sites More sharing options...
sandall Posted April 1, 2018 Share Posted April 1, 2018 There's a self-adhesive version called Blacktak (from Le Mark & probably others) which should be fine for LED fixtures. Link to comment Share on other sites More sharing options...
J Pearce Posted April 1, 2018 Share Posted April 1, 2018 But for LEDs where heat isn’t an issue black card and good matt gaffer can do the same job at a much lower cost. Link to comment Share on other sites More sharing options...
sunray Posted April 1, 2018 Share Posted April 1, 2018 But for LEDs where heat isn't an issue black card and good matt gaffer can do the same job at a much lower cost. Sure worked for me, except I used some towels instead of card and the lights were pointing straight down and hidden. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.