Trunker Posted December 4, 2017 Share Posted December 4, 2017 Seasons greetings to all blueroomers. Hope you aren't to run off your feet with a Panto etc. Just a quick question regarding making a lead up for Crown PCC-160. Does the standard 1-1, 2-2, 3-3 work for this mic or are pins 2 and 3 crossed? All our leads and Mics are out at the moment otherwise I would check one of them. I need to make some spares up as we all know how temperamental the mini XLR end can be. Thank you in advance to all those who can help. Link to comment Share on other sites More sharing options...
Shez Posted December 4, 2017 Share Posted December 4, 2017 On mine, they are indeed wired 1-1. Beware of the different pin layout on the mini XLR though! Link to comment Share on other sites More sharing options...
Trunker Posted December 5, 2017 Author Share Posted December 5, 2017 On mine, they are indeed wired 1-1. Beware of the different pin layout on the mini XLR though! Thanks Shez, I found the manual and schematic diagrams as well. All works fine now and I did notice the different layout, that's what got me to ask the question and do my research before soldering. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.