ben.suffolk Posted May 17, 2005 Share Posted May 17, 2005 Is there any way at all, to convert a remote of a cheap smoke machine (IEC) to DMX or 0-10v so as it can be used through a desk? Cheers!<{POST_SNAPBACK}> Hi, I have not got round to posting details of this project on my site yet, but I have built a DMX relay to control an old smoke machine I had kicking around. In fact the design I used can have upto 3 relays, and you set an option for each relay with a dip switch so it can either be a switch, or use its channel value to set up a ratio of on:off time, for instance on for 2 seconds, off for 10, to give a constant low smoke output. If your interested I could post the schematic, or I could price up making one for you I guess. Email me if your interested. Regards Ben Link to comment Share on other sites More sharing options...
3guk Posted May 17, 2005 Share Posted May 17, 2005 I know I would like the schematic. Interested more than anything Link to comment Share on other sites More sharing options...
ben.suffolk Posted May 17, 2005 Share Posted May 17, 2005 Ok, I have now completed the project page, so I have edited this last post to provide a link to it, and removed the details of the older revision of the schematic. You can find full details at my DMX Relay Project Page Regards Ben Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.