Srobo512 Posted September 3, 2016 Share Posted September 3, 2016 Hi, Started rigging for a show yesterday and decided to do the Pan invert on the desk instead of the fixtures. But, whenever I used a pan inverted fixture on the old desk ( Illusion 500) the fixture did the opposite (mirror each other not 180 degrees out) to its counter parts, as expected. But, on the FLX, once pan invert is selected the fixture essentially mirrors its counterparts by 180 degrees. example, I set fixtures 1 and 3 to wash stage right and the others are facing the wrong way by 180 degrees. weather or not I'm just being thick, I don't know! but if there's a way to make them essentially 'mirror' (1+3 move right, 2+4 move left etc) each other? Any input appreciated! Cheers, Sam Link to comment Share on other sites More sharing options...
gyro_gearloose Posted September 3, 2016 Share Posted September 3, 2016 Have you tried inverting tilt as well? Link to comment Share on other sites More sharing options...
Srobo512 Posted September 3, 2016 Author Share Posted September 3, 2016 Have you tried inverting tilt as well? No, I didn't think of that as originally I thought it would make the situation worse! But now as I think about it that would solve the problem?! I shall give it a shot tomorrow before I start programming! Thanks!, Sam Link to comment Share on other sites More sharing options...
jonhole Posted September 5, 2016 Share Posted September 5, 2016 But now as I think about it that would solve the problem?!Yep, that should solve the problem! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.