Jivemaster Posted May 27, 2016 Share Posted May 27, 2016 The critical issue is how the system fails, and what it does in case of failure! Failure including finger trouble on the desk and any remote or automated places. One issue with DMX is that it can have a faulty frame very occasionally, Probably a receiver that will check several frames and discount erratics would be good. In the days of big filaments a frame size glitch on the DMX didn't show because of the filament time constant. Now with LEDs that really can flash at 44HZ with ease some old errors will now show up. Try to decide what "Safe" is, then find out how to make the system fail safe with or without DMX Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.