MickieMackieMoo Posted February 16, 2016 Share Posted February 16, 2016 Help Please... I need to source around 12 of these to rewire some old Clay Paky Units.... Just standard 4 wire cable to motor connector about metre long... I bought a stash of them years ago... But now I've run out and can not remember where I got them from... Any ideas pleasehttp://www.lichtboxx.com/images/thumbs/ClayPaky%20StageLight%20300%20%20Steppermotorkabel%20Focus%20031726-475x475.jpg Link to comment Share on other sites More sharing options...
Stuart91 Posted February 16, 2016 Share Posted February 16, 2016 Have you tried talking to Pulsar? They did most of the electronics for Clay Paky movers back in the day. Link to comment Share on other sites More sharing options...
itiba Posted February 16, 2016 Share Posted February 16, 2016 The Lighting Hospital will be able to make some up for you. Link to comment Share on other sites More sharing options...
johnhuson Posted February 16, 2016 Share Posted February 16, 2016 Lighting Hospital is a good suggestion but you could also speak to Ambersphere who are UK dealers for Clay Paky. From past experience Clay Paky hold a reasonable stock of legacy parts. Link to comment Share on other sites More sharing options...
lonemorf Posted February 16, 2016 Share Posted February 16, 2016 Pulsar, to my knowledge sold all their CP spares on, in bulk to someone (whos name I annoyingly forgot!), but there wasn't a lot left anyways. Ambersphere I can say with 100% confidence can get pretty much anything needed - I have had a couple of condensor lenses and a mirror so far for my minis- I don't get the impression Looms will be an issue. But, if you trawl the darkets depths of the bay - you can find gems:http://www.ebay.co.u...oQAAOSwgQ9Vxi1n Link to comment Share on other sites More sharing options...
MickieMackieMoo Posted February 17, 2016 Author Share Posted February 17, 2016 Lonemorf I still have your number. I did call you towards the end of last year...but then I had to use the lights so I bastardized one scanner to get my fleet working again Do you still have a stash of miniscan spares?? Pulsar, to my knowledge sold all their CP spares on, in bulk to someone (whos name I annoyingly forgot!), but there wasn't a lot left anyways. Ambersphere I can say with 100% confidence can get pretty much anything needed - I have had a couple of condensor lenses and a mirror so far for my minis- I don't get the impression Looms will be an issue. But, if you trawl the darkets depths of the bay - you can find gems:http://www.ebay.co.u...oQAAOSwgQ9Vxi1n Link to comment Share on other sites More sharing options...
lonemorf Posted February 17, 2016 Share Posted February 17, 2016 Still got stuff - but not had a chance to go through it all - been *so* busy. Im sure we can sort something out - I just need a little time - at the moment, the earliest I think I am going to be able to do anything is 2nd week in March :( Link to comment Share on other sites More sharing options...
MickieMackieMoo Posted February 26, 2016 Author Share Posted February 26, 2016 that's fine.... shall leave it a week and a bit then give you a call thanksmichaelStill got stuff - but not had a chance to go through it all - been *so* busy. Im sure we can sort something out - I just need a little time - at the moment, the earliest I think I am going to be able to do anything is 2nd week in March :( Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.