Dmx512 Posted July 13, 2015 Share Posted July 13, 2015 Hi When I record a colour on an led par into my pearl expert the colour snaps on instead of fading up when I push the fader......any Ideas?regardsDave Link to comment Share on other sites More sharing options...
niclights Posted July 13, 2015 Share Posted July 13, 2015 This is correct because the colour channels are LTP. The majority of LED type personalities should have a separate dimmer channel (either virtual or actual) which is HTP. So you would normally control intensity with that. However, if you need to have fadeable colour components (for example three separate RGB playbacks for manual colour mixing) then you can set the playback to mode 2 (fade by fader) which will allow fading of LTP attributes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.