sigill Posted April 15, 2005 Share Posted April 15, 2005 Hi I am a fairly confident strand operater but there is something that is bothering me and has done for some time. I quite often need to change a number of sub flash keys to macros but at the moment I am doing this one at time by roller balling down and wheeling to mac in the sub menu this is a little tedious when you have a 550 and 54 sub to do. I am pretty sure that I have seen some one change groups of keys in one go. Am I imagining this or can it be done. Thanks Si Link to comment Share on other sites More sharing options...
gareth Posted April 15, 2005 Share Posted April 15, 2005 I don't think there's a way to do this. But at least you only have to do it once, when you're setting the desk up for a production ..... Link to comment Share on other sites More sharing options...
Bryson Posted April 16, 2005 Share Posted April 16, 2005 If you use the Macros from show to show, I guess you could save it into your "setup disk". Save a bit of time. Link to comment Share on other sites More sharing options...
sigill Posted April 16, 2005 Author Share Posted April 16, 2005 Good point Bryson....was sure there was a reason why I havn't done that but cant for the life of me think why.......was just convinced that I saw a strand guy do it once. Link to comment Share on other sites More sharing options...
Gilly Posted April 16, 2005 Share Posted April 16, 2005 The command line for example SUB 1 MACRO 1 * when entered in the SUB screen works, but I don't know of a way to do them all at once sequentially, so you'd still have to bang in that command line or a variation on it 54 times Hope that helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.