sclg Posted September 30, 2014 Share Posted September 30, 2014 A bit of X32 advice please if there are any experts around...Our (volunteer-run) theatre has just got an X32 and moving from an old 01-V I'm finding the extra flexibility a mite confusing :huh: We normally run the FoH speakers on the main LR channels and the other 4 speakers are run as mono channels as they are used solely for spatially distinct sound effects.I've got the 4 effects speakers on mix busses 1 to 4 and I can set an out put to go the way I want - but how do I NOT have it coming out the main LR bus as well??I know I'm missing something blindingly obvious but any pointers would be appreciated !(... or am I going about things the wrong way??) Thanks Link to comment Share on other sites More sharing options...
mi-ul Posted September 30, 2014 Share Posted September 30, 2014 Select the channel you want and then to the left of the screen is a section marked "Main Bus". Press the large button at the bottom of that section to include (lit) / bypass (unlit) the main stereo bus. Link to comment Share on other sites More sharing options...
sclg Posted September 30, 2014 Author Share Posted September 30, 2014 Thanks. Will try that tomorrow. Link to comment Share on other sites More sharing options...
Electrolytic Posted October 3, 2014 Share Posted October 3, 2014 like on an analogue console un-assign the channel from being sent to the Main L&R bus.On the X32 its under the PAN knob. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.