Black-Out Cue on Avolites Titan

[numberwrong]

Hiya,

 

How do you make the HTP levels in one cue override other cues to a lower level (so thay behave as LTP)?

 

eg you have a few cues running and you want to 'Blackout' some lights in both cues. I want to raise the fader on the black out cue and the relevent lights to dim.

 

any ideas? I want to do this tomorrow! (sunday)

 

PS desk is Pearl expert running titan 6

[niclights]

You can fire a cue in mode 3 to fade out all intensities from other playbacks set to the same or lower priority. This cue can be empty. If you need the blackout cue to be part of a cuelist then you can use autoload to fire the mode 3 playback.

The mode 3 cue can also contain playback timings if required. Note that if you are autoloading then the timings will be used from the cue being loaded, rather than from the cuelist timing.

If you need to keep some fixtures from fading out then you can place these in a separate cue set to a higher priority.