Nelly Posted March 20, 2005 Share Posted March 20, 2005 Hi, Just about to buy a shed load of legs for my Lite-Deck staging but can't make my mind up on the leg lengths?? Should I get the legs cut to 1ft which would make the overall stage height just over that with the deck on top or get the legs cut to just under 1ft to make the stage height 1ft with the deck on top ?? Hope that makes sense ?! N. Link to comment Share on other sites More sharing options...
Bryson Posted March 20, 2005 Share Posted March 20, 2005 More details please.... What's it being used for? Who by? Are you a touring house, producing, corporate gigs, or what? In general though, having the deck height at a round number of feet will probably be best, so get the legs at just below 1ft. Link to comment Share on other sites More sharing options...
robloxley Posted March 20, 2005 Share Posted March 20, 2005 are you going to put end-caps on the legs to protect the stage - if so allow for them in the length Link to comment Share on other sites More sharing options...
Piers Shepperd Posted March 20, 2005 Share Posted March 20, 2005 Go for surface height of deck being a known height.Out of interest why not go for mm rather then inches.i.e. 300mm, 600mm etc etc? Piers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.