Coda 'Flags' in the Frames

[numberwrong]

Which way up to the flags/teeth/triangles (what ever you want to call them) go in Codas??

[alistermorton]

I put the teeth at the end furthest from the cyc, since they're there to soften the edge of the beam, so the beam doesn't have a sharp edge in sight.

[TomHoward]

As said soft edge so bottom side for top floods and top side for ground row.

[vinntec]

So if they are hanging, then the removal strip which facing out at the top and teeth at the bottom. If groundrow, then otherway around. Also make sure the Coda itself is the right way around - lamp furthest from cyc (top if above, and bottom if below). Peter

[martinw]

"Also make sure the Coda itself is the right way around"

 

It's amusing how few people get this right - I suspect most Codas get used the wrong way up.

 

M

[indyld]

"Also make sure the Coda itself is the right way around"

 

It's amusing how few people get this right - I suspect most Codas get used the wrong way up.

 

M

 

Don't start all that off again... http://www.blue-room.org.uk/index.php?showtopic=47094&view=findpost&p=390609

[vinntec]

"Also make sure the Coda itself is the right way around"

 

It's amusing how few people get this right - I suspect most Codas get used the wrong way up.

 

M

Strand didn't help as the labels seem to be put on random ways round! Only found this out by looking at a row of Codas I had carefully rigged with all the labels upright to find one that looked like a missing tooth as it was upside down!