Jamesmul Posted August 19, 2013 Share Posted August 19, 2013 How do you connect a Eiki WXL-200 projector to a Kramer RC-8RE/UK. I've been told it can be done but looking at both manuals neither gives the information on how. Link to comment Share on other sites More sharing options...
david.elsbury Posted August 19, 2013 Share Posted August 19, 2013 What are the connection options you have available on the bits of kit? Link to comment Share on other sites More sharing options...
Shez Posted August 19, 2013 Share Posted August 19, 2013 The Kramer can output RS232 which can control just about any projector. You'll need Kramer's software to configure the controller. My experience is with AMX controllers but I imagine these aren't entirely different. It should have built in templates for different projector manufacturers; if not, the codes should be in the back of the Eiki manual. Link to comment Share on other sites More sharing options...
Jamesmul Posted August 20, 2013 Author Share Posted August 20, 2013 The Kramer can output RS232 which can control just about any projector. You'll need Kramer's software to configure the controller. My experience is with AMX controllers but I imagine these aren't entirely different. It should have built in templates for different projector manufacturers; if not, the codes should be in the back of the Eiki manual. Where do you connect it to though on the projector the LAN connection, jack wired remote output or serial control port? Link to comment Share on other sites More sharing options...
beware Posted August 20, 2013 Share Posted August 20, 2013 For RS232, the serial. With a null modem cable. Eiki projectors support the basic RS232 control set that Sanyo models support. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.