theatretechie Posted August 25, 2012 Share Posted August 25, 2012 Hi Guys, I have a Strand 110Node which I use in my MA Network with the consoles kicking out Shownet. I now have a Node 103 the rack version. On the 110 I smiply punch in its IP address on my browser and it calls up the settings and I change as needed. But with the 103 I can't seem to do that. Does anyone know how to do it? In the days of the 500 series it was all DOS. Win 7 does not support does and the DOSBOX apps are terrible. Any ideas and suggestions would be greatly appreciated. Or even if you have a manual for 103 would help as I can't find one online. Thanks. Link to comment Share on other sites More sharing options...
theatretechie Posted September 7, 2012 Author Share Posted September 7, 2012 I noticed a few of you looked at the post.I've spent some time working on the nodes. I have worked out how to do it and configure them for strand and MA use. So if you do find you need the info let me know. I wrote a crib sheet for it. Link to comment Share on other sites More sharing options...
Tomo Posted September 12, 2012 Share Posted September 12, 2012 Might I suggest putting your crib sheet up in the Blue Room Wiki? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.