Jump to content

led cans


NMI

Recommended Posts

for that money you will getting very weak led par cans. if you can get about £100 you can pick up 1w per bulb types

 

Not so, I've got some of these from thomann, £75 per unit, they are 36x1W

http://www.thomann.de/gb/stairville_led_par64_1w_pro_black_floor.htm

 

Impressive brightness, fairly narrow beam (about 20deg), dimming is steppy at the bottom.

4 of them are lighting the rear of the hall in the photo below.

 

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/c67.0.403.403/p403x403/484465_133906796738412_180294843_n.jpg

Link to comment
Share on other sites

And that's just four? Quite impressive actually.

 

The venue staff couldn't believe it, especially when I told them the price. It transformed the hall from a gloomy council venue to something interesting looking with about 2 minutes work.

Link to comment
Share on other sites

Those look quite impressive, certainly for uplighting and such. Just to play elephant in the room - how's the dimming curve on them ?

 

As you would expect at that price, it's steppy for the first few levels at the bottom, but fine elsewhere, they do have a variable speed fan which is quiet but audible in silent rooms.

For a quick bosh in uplighting fixture they are excellent - I've got the floor can version so you just plonk them down. You can set a range of fixed colours on the dipswitches if DMX control is not needed - I used 2 set on purple in this pub gig for uplighting the black curtain at the back, along with a couple of (non-led) par56 floor cans with diffuser to lift the performer a bit. Total setup time about 5 minutes.

 

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-prn1/36576_292201627527917_1858121334_n.jpg

Link to comment
Share on other sites

Interesting, how long have you had them? ive got a load of these, http://www.thomann.de/gb/stairville_led_par_64_black_floor.htm which are obviously much cheaper and not as powerfull, use them for basic uplighting and small band in pub type work. how ever the dip switches on them are rubbish, many of them can not be addressed properly now and I know im not the only one thats had this issue with them. so I was wondering how youve found switches? also the XLR out? a few of mine have lost the push button same as in the thread at the top of this section.
Link to comment
Share on other sites

For the price, they have been great and I haven't had any problems with bits dropping off.

When I bought them last December, Thomann did 4 versions (silver/black, floor/hanging), now I can only see the black floor version so I wonder if they are about to be obsoleted.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.