sam.henderson Posted February 12, 2005 Share Posted February 12, 2005 Hi all, Which companies do you use to transfer your images from the computer to 35mm slides. Or do people do it themselves?? If so how is this done etc. etc. Thanks all, From a AV newbie!! Sam Link to comment Share on other sites More sharing options...
Andrew C Posted February 12, 2005 Share Posted February 12, 2005 Not YET paid anyone to do it, but as there's a whole filing cabinet full at work, I may yet... On the DIY front you have basically two options;- 1) A camera-lens mounted slide carrier. Mount on a good digital camera, point at a bright light and "click". Keep trying until exposure is what you need/want. I was told that this is a bit hit & miss. There again I was told that by the salesman that sold me http://images-eu.amazon.com/images/P/B0001JZNDE.01.MZZZZZZZ.jpg or one a bit like it but 4 years older. Works well but it's duller than PAT testing. :P (sorry, forgotten how to sort out the Amazon image. I'll try to work it out later!!) DOH!! Just re-read the origional, and non of this will help at all as you're going the other way!! Link to comment Share on other sites More sharing options...
PeterT Posted February 12, 2005 Share Posted February 12, 2005 It is possible to do this yourself however it can be tricky. You will need: Powerpointreasonable 35mm camera with slide film (100 ASA is best)Zoom lensShutter release cableTripod 1) set up your digital images on separate powerpoint slides2) make sure your powerpoint slides have black edges or you run the risk of getting a different edge to your slide. 3) line up your camera to inside the inner edge of your montior's casebear in mind that most camera viewfinders do not give you a 100% view of what's going onto the film.4) This is best done in a darkened room to avoid reflections of lights appearing in the slide.5) You'll need a *slow* shutter speed (at least 1/30th of a second or longer) to avoid picking up the scan lines of the monitor so you'll need a tripod and shutter release cable to avoid camera shake.6) get a reading for the exposure and then take at least 3 shots of the slide as 35mm slides are very fussy about their exposure.( one a stop below, one on the metered exposure and one a stop above)you can change the 'stop' of the camera by changing either the aperture or the shutter speed, making the shutter speed faster will give you your stop below and then making the shutter speed slower will give you the stop above. Link to comment Share on other sites More sharing options...
Jivemaster Posted February 12, 2005 Share Posted February 12, 2005 This is a standard job in a big photolab The direct to film camera is expensive but slides off files shouldnt even be very expensive. Do discus file format and carrier media before sending the job in to a lab. Metro Clerkenwell Road London EC1 comes to mind in East london. A good slide off file should colour match, a slide off a screen wont. Link to comment Share on other sites More sharing options...
sam.henderson Posted February 12, 2005 Author Share Posted February 12, 2005 Thanks for all the info so far, Will deffinetly get it sent off to do though. Doing it myself is going to be to hard a job for someone with no photography knowledge! Anyone know a rough price for getting this done?? Sam Link to comment Share on other sites More sharing options...
Jivemaster Posted February 12, 2005 Share Posted February 12, 2005 http://www.metroimaging.co.uk/prices/pdigservices.htm Metro charge £6,50 +vat each in plain plastic mounts Do you need pin registered mounts? There must be several companies with branches close to the town of No Information where you are. Metro do accept data by email and ISDN but a decent pic contains a lot of data. your or their email server may not allow files that big . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.