Fizikal Rex Posted January 27, 2012 Share Posted January 27, 2012 I am in the process of converting our analogue system in school to DMX and have bought a Showtec Multi Exchanger. What I am after I s a socket so I can run a cable between this and the existing plug. The current connection to the Pulsar desk is a BICC 23pin SM20M-ITN1BL. I have tried to locate one without any luck. Does anyone know where they can be bought from or an equivalent. I could just cut the current cable, but do not want to do this as the current desk is still in use regularly. Link to comment Share on other sites More sharing options...
Brian Posted January 27, 2012 Share Posted January 27, 2012 The current connection to the Pulsar desk is a BICC 23pin SM20M-ITN1BL.Now made by Souriau, also known as Metalok Bantams. Available from Farnell. Link to comment Share on other sites More sharing options...
dirkenstein Posted January 27, 2012 Share Posted January 27, 2012 ITT Ringlock connectors are compatible, and available from Farnell. However, thay are really quite expensive.Do you need a plug or socket? The loose cables usually have plugs.The last time I bought one, some years ago, it was from Pulsar in Cambridge directly, and cost around £20. Link to comment Share on other sites More sharing options...
Brian Posted January 27, 2012 Share Posted January 27, 2012 And also known as Burndy QM series connectors. Link to comment Share on other sites More sharing options...
Fizikal Rex Posted January 27, 2012 Author Share Posted January 27, 2012 Thanks I will look into these Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.