haymere Posted January 8, 2012 Share Posted January 8, 2012 Does anyone know where I can get some of these I have looked at canford and they only do hook clamps which would not work on vertical wall mounted truss Thanks Link to comment Share on other sites More sharing options...
brainwave-generator Posted January 8, 2012 Share Posted January 8, 2012 Depends what microphone it needs to fit, doesn't it? Or do you mean half coupler to the screw thread for mics etc? I think when I bought some for a studio, I had to buy half coupler to TV spigot, then TV spigot to mic screw, both of which were quite easily available. Link to comment Share on other sites More sharing options...
cedd Posted January 8, 2012 Share Posted January 8, 2012 I read it as being a need to clamp a mic to an upright pole, so mic type shouldn't matter as I assume the OP has the clamps for them. As long as your clamps have removeable bolts, you should be able to get hold of replacement bolts of the right size (3/8 or 5/8 isn't it?) and just swap them. I've done this with a few hook clamps, but I don't see a reason why the same couldn't be done with a half coupler. Like I say, all depends if the original bolts are captive or not. Link to comment Share on other sites More sharing options...
boatman Posted January 8, 2012 Share Posted January 8, 2012 Canford have a "Spare captive 3/8 inch bolt kit" (53-703) designed to fit a hole up to 12mm diameter. It's only 71P + VAT and will fit any standard half coupler. It worked for me. Link Edit: Fixed broken link. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.