Tuppy68 Posted July 11, 2011 Share Posted July 11, 2011 Hi all looking for a motor for my disco ball any suggestions or are they all pretty much the same,the ball is roughly 50cm cheers Link to comment Share on other sites More sharing options...
Neil Hampson Posted July 11, 2011 Share Posted July 11, 2011 For a 50cm Ball, any of the mains powered motors will be fine. Link to comment Share on other sites More sharing options...
Ynot Posted July 11, 2011 Share Posted July 11, 2011 Most of them will state on them (or on the sales ad) what size ball they will be suitable for. Link to comment Share on other sites More sharing options...
bigclive Posted July 11, 2011 Share Posted July 11, 2011 One thing to check is the speed. Many of the modern ones run way too fast. If you look at the heavier duty ones then they often have higher gearing and run a lot slower.These units usually contain synchronous motors, so the speed is fixed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.