spinmaster1 Posted September 29, 2009 Share Posted September 29, 2009 Hi, We are looking to have 2 small presentation projectors permanently installed in our rig. Does anyone know where I can buy a universal projector mount that has a truss bracket on. Also, just wondered if it's ok to use a truss bracket like this for permanent installations or do I need something a bit more sophisticated? Thanks,Rob Link to comment Share on other sites More sharing options...
dunk_1984 Posted September 29, 2009 Share Posted September 29, 2009 Look at Unicol's offerings. http://www.unicol.com/ Link to comment Share on other sites More sharing options...
rgye Posted September 30, 2009 Share Posted September 30, 2009 CPC (http://cpc.farnell.com) have a much cheaper one than the Unicol made by Ultimax, order code ST0172047 Link to comment Share on other sites More sharing options...
the kid Posted September 30, 2009 Share Posted September 30, 2009 The only issue I can see with the CPC stuff is that you can't seem to decide on the pole length, unicol you can make what ever size you want. Link to comment Share on other sites More sharing options...
rgye Posted September 30, 2009 Share Posted September 30, 2009 Although I've not seen the actual mount I suggested, we buy a lot of similar mounts and quite often just cut them to length with a hacksaw. You usually have to drill new holes to accommodate the safety bolt, but in my experience it is normally quite straightforward. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.