lightjocky Posted March 12, 2009 Share Posted March 12, 2009 Hi, I am currently programming a chamsys pc wing for a show tomorrow and am having difficulty with some of the un branded LED par 64 cans The cans say on the side of them LED PAR64S RGB DMX they have 6 channels with 8 dip switched and a switch from auto to music any idea what I can do to get them working via DMX ? Maybe another fixture with the same profile ? thanks in advance Jamie Link to comment Share on other sites More sharing options...
Mr Steve Posted March 12, 2009 Share Posted March 12, 2009 Program the fixture as 6 generic dimmers. Go through each channel and see what happens. These things are usually something like 1) effects 2)R 3)G 4)B 5) dimmer 6)speed, but this varies on manufacturer. Link to comment Share on other sites More sharing options...
lightjocky Posted March 12, 2009 Author Share Posted March 12, 2009 I have solved it if any one ever has the same problem again, I programmed it as a show tec par 64 can and edited the channels from 4 to 6 on the (edit head) option But you must edit it before you patch it other wise it will not work also dont pay attention to the DIP switch on the screen as they are for 9 not 8 ! Thanks for you replay J Link to comment Share on other sites More sharing options...
andylights Posted March 13, 2009 Share Posted March 13, 2009 dont pay attention to the DIP switch on the screen as they are for 9 not 8 ! But 1 through 8 will be correct...and on your fixture you can't patch above 128 anyway. Or is there another reason why you say to ignore the on screen DIP display? Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.