danburns Posted February 24, 2009 Share Posted February 24, 2009 I remember a topic on here somewhere about a free piece of CAD software from a (I think) German company. Basically, you designed the panel, and sent it off for them to make it up.After a computer upgrade, I can't find it (or the topic!)...although google seems to be having a bad day today. Can anyone point me in the right direction? Thanks Dan Link to comment Share on other sites More sharing options...
Stee_cri1 Posted February 24, 2009 Share Posted February 24, 2009 hmmmm this sounds interesting, I would also like to hear more about this as I have just finished 2 racks but have 3 more to do Im guessing it is a custom built interface on the front? Thanks Link to comment Share on other sites More sharing options...
revbobuk Posted February 24, 2009 Share Posted February 24, 2009 I think you mean the service offered by Front Panel Express in the US and Schaeffer in Europe. Software from their website or here for the US link. Link to comment Share on other sites More sharing options...
Shez Posted February 24, 2009 Share Posted February 24, 2009 I'll chuck in a recommendation for Schaeffer - the panel they made for me wasn't cheap but is extremely good quality and certainly looks the part. Treble check your design though, and if you're really paranoid (like me) print it off at full size and make a cardboard mock up of it to check everything mounted on it fits behind the panel without fouling anything else. Link to comment Share on other sites More sharing options...
danburns Posted February 24, 2009 Author Share Posted February 24, 2009 That's the one! Cheers guys :** laughs out loud **: Dan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.