KeithGinty Posted November 17, 2008 Share Posted November 17, 2008 Hello Does anybody know what size the thread is under the underside of the projector for flying. I think it is either M6 / M8 but not sure. Thanks Link to comment Share on other sites More sharing options...
Bryson Posted November 17, 2008 Share Posted November 17, 2008 Which projector? Sanyo make several.... Link to comment Share on other sites More sharing options...
KeithGinty Posted November 17, 2008 Author Share Posted November 17, 2008 XT25 But it is universal across the entire sanyo range Link to comment Share on other sites More sharing options...
Pete McCrea Posted November 17, 2008 Share Posted November 17, 2008 Seeing as they are the same size as a rack screw, I'd go M6.... Link to comment Share on other sites More sharing options...
Andrew C Posted November 17, 2008 Share Posted November 17, 2008 rack screw, I'd go M6....The problem with that is you can get both M5 & 6 cage nuts. Link to comment Share on other sites More sharing options...
grizzly Posted November 18, 2008 Share Posted November 18, 2008 Well, via the controversial method of actually visiting the Sanyo website, and searching for information on the model, you should end up with this: Sanyo PLC-XT25 Owner's Manual The information you are looking for is in the dimensional drawings on page 82. Link to comment Share on other sites More sharing options...
Pete McCrea Posted November 18, 2008 Share Posted November 18, 2008 rack screw, I'd go M6....The problem with that is you can get both M5 & 6 cage nuts. Sorry- to add, we use the VDC M6 rack Screws, hence the link. And obviously Grizzly's got a good point with the manual... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.