Dmills Posted July 12, 2008 Share Posted July 12, 2008 If you can only find amps with more then 32db of gain (I assume that is dbu as you don't state an impedance), then just stick a ten db pad between the processor and the amp, it is only 3 resistors for gods sake and can be built into the cable between the processing and the amp. The reason to avoid amps with additional DSP is that the Nexo processor takes feedback from the amp speaker terminals and the AD/DA delays could cause this control loop to become unstable. Regards, Dan. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.