Stuart_T Posted December 23, 2007 Share Posted December 23, 2007 Hi Guys. I have got in some ColourBlast 12's in over the chirstmas period for a upcoming show and they come with the PDS150 psu but there is no where on the unit to address these fixtures. I was wondering if they need to be connected to a bit of software using the ethernet protocol to address these units. I am using a few of these kits and would like them to be on different addresses. Thank you in advance for all your replys and help. Stuart Link to comment Share on other sites More sharing options...
david.elsbury Posted December 23, 2007 Share Posted December 23, 2007 Well. a 30 second google for "colorblast addressing" gave the following link as the first hit.http://www.colorkinetics.com/support/userg...olorBlast12.pdf You did search google before posting, right? (there is a section in the PDF called "Adressing"... Link to comment Share on other sites More sharing options...
Stuart_T Posted December 23, 2007 Author Share Posted December 23, 2007 Thanks for the reply. I must have been barking up the wrong tree yesterday when I searched for this. I managed to find the datasheets for the psu but it couldnt help me there. Thanks for the help Stuart Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.