Blue Room Posted December 11, 2009 Share Posted December 11, 2009 Hardware: Jester, Jester ML and Jester TLA range of easy to use generics and moving lights desks from Zero 88, very popular with the schools due to their low cost and small form factor. Two models of the Jester are available - 12/24 and 24/48, three models of the Jester ML are available - ML, ML 24, and ML 48, together with two models of Jester TL (TL and TLXtra). Wiki page: Jester, Jester ML and Jester TLProduct page: http://support.zero88.com/main/en/product/52, http://support.zero88.com/main/en/product/89 and http://support.zero88.com/main/en/product/94Manufacturer's website: http://www.zero88.comAnnouncement supplied by: Peter KirkupSoftware release: v3.4 (ML v3.0)Release date: 10/12/2009 Link: http://support.zero88.com/main/en/product/52, http://support.zero88.com/main/en/product/89 and http://support.zero88.com/main/en/product/94Release 3.4 (ML 3.0) adds MIDI Show Control functionality, support for Inverse channels, plus a number of other improvements.Past ReleasesAnnouncement supplied by: Peter KirkupSoftware release: v3.3 (ML v2.5)Release date: 14/08/2009 Link: http://support.zero88.com/main/en/product/52, http://support.zero88.com/main/en/product/89 and http://support.zero88.com/main/en/product/94 JesterML/TL release 2.5 improvements to the loading of RDM (Remote Device Management) fixtures, plus a number of other fixes. Announcement supplied by: Peter KirkupSoftware release: v3.3 (ML v2.4)Release date: 12/06/2009 Link: http://support.zero88.com/main/en/product/52, http://support.zero88.com/main/en/product/89 and http://support.zero88.com/main/en/product/94 Jester release 3.3 fixes a potential lock-up when a USB keyboard is connected (r2 hardware only). JesterML/TL release 2.4 adds the following new features, in addition to a number of other improvements to the desk software: Features:RDM (Remote Device Management) controller functionality.Redesigned Assign Fixtures menu to allow quicker selection of fixtures from the library.Dwell times and Auto-triggers for the memory stack.Recordable fade times for submasters.German Online Help for Jester TL.Announcement supplied by: Peter KirkupSoftware release: v3.2 (ML v2.3)Release date: 27/11/2008 Link: http://support.zero88.com/main/en/product/52 and http://support.zero88.com/main/en/product/89 Features:Virtual Intensity support for Jester ML & TLInitial support for Jester TLPan/Tilt Swap options for Jester ML & TLGerman Online Help for Jester MLBug Fixes 3.1 (ML v2.0)The Offline Editor for the Jester & JesterML desks - Phantom Jester - has been released. Pageable submasters on JesterMLImproved DMX Input capability on Jester MLImproved monitor displaysUSB keyboard support (Jester ML). A number of minor improvements to the software2.1Pressing Go mid-fade no longer snaps to the end of the current crossfade before starting the new crossfade - it now fades from the current memory stack outputs.If Preset A faders are used for live Auxiliary control, they need to be moved back to their previous positions before they regain control of the Presets. The LED in the Preset flash button will flash to indicate that the corresponding fader needs to be moved before control is regained.After adjusting a single Submaster Chase or Memory Stack Chase using Shift and the Speed Control, on releasing Shift, other chases no longer snap to the new speed.2.0 - 08/11/2006Recorded DMX Input is now replayed correctly.MIDI timecode is now generated in test mode (this can be used for testing Frog Boxes, Frog2s etc).1.9 - 29/08/2006Dutch language help text added.Beat function now uses the last two presses rather than the first two.Manual chases no longer jump backwards if the fade pot is moved shortly after a step advance is completed.In Program Mode, the Copy function now also copies the memory/submaster name. This will be pasted into blank memories/submasters only.1.8 - 15/05/2006The Copy button is now enabled in Run Mode, to allow snapshots of the current look to be taken ready for pasting into a new memory/submaster in Program Mode.In Program Mode, when selecting an unprogrammed memory/submaster, the outputs now remain unchanged (previously they used to snap to the current fader positions).1.7 - 16/03/2006When in Program Mode, after a program operation, the desk will now only automatically increment the memory number if the next memory is unprogrammed. This avoids unwanted output changes when changing from Run Mode to Program Mode to make edits.1.6 - 17/02/2006French language help text added. Use the 'Help Language' menu in Super-User to set the language for the on-line help.When naming memories, submasters or shows, pressing a different letter button will now immediately advance the cursor before typing that letter. The problem of submasters outputting from the wrong page (introduced in version 1.5) has been corrected.1.5 - 31/01/2006German language help text added. Use the new 'Help Language' menu in Super-User to set the language for the on-line help.There is no longer a requirement to enter leading zeroes for numeric fields.Chases no longer slow down at high step numbers, giving greater consistency between Program mode and Run mode. The live override of chase speeds now functions correctly when changing between Program mode and Run mode.When programming chases, the maximum limit of 999 steps is now imposed correctly.When previewing chases in program mode, the chase now runs from the selected step.1.4 - 29/09/2005Fixed marginal timing problem accessing the NVR.1.3 - 12/09/2005Fixed real-time-clock.1.2 - 07/09/2005Fixed crossfade bug in Run Mode.Fixed lumpy DMXIN from DMX DeBug.Now shows error correctly when no panel PCBs connected.1.1 - 30/08/2005Load Show - re-load DMX patch after load show.Test Mode - Show all button presses on LCD.1.0 - 22/08/2005Original Link to comment Share on other sites More sharing options...
jonhole Posted March 24, 2014 Share Posted March 24, 2014 Announcement supplied by: Jon HoleSoftware release: v.4.0Release date: 24/03/2014 Jester 12/24, Jester 12/24 19" Rack Mount and Jester 24/48: http://zero88.com/support/index.php?/Knowledgebase/Article/View/238/Jester ML, Jester ML24, Jester ML48, JesterTL and Jester TLXtra: http://zero88.com/support/index.php?/Knowledgebase/Article/View/412/ Features:Showfile compatibilityBug fixes Full details of changes: within the Release Notes included on the above links Link to comment Share on other sites More sharing options...
jonhole Posted December 11, 2014 Share Posted December 11, 2014 Announcement supplied by: Jon HoleSoftware release: v.4.1Release date: 11/12/2014 Jester 12/24, Jester 12/24 19" Rack Mount and Jester 24/48: http://zero88.com/su...ticle/View/238/Jester ML, Jester ML24, Jester ML48, JesterTL and Jester TLXtra: http://zero88.com/su...ticle/View/412/ Features:Bug fixes Full details of changes: within the Release Notes included on the above links Link to comment Share on other sites More sharing options...
Shez Posted December 12, 2014 Share Posted December 12, 2014 You might want to check those links, Jon - the three dots in the middle are in the link as well as the text so they don't work. Guessing you copied and pasted from the previous post. Link to comment Share on other sites More sharing options...
jonhole Posted March 10, 2015 Share Posted March 10, 2015 Thanks - I've only just seen your comment. Updated links: Jester 12/24, Jester 12/24 19" Rack Mount and Jester 24/48: http://zero88.com/support/index.php?/Knowledgebase/Article/View/238/Jester ML, Jester ML24, Jester ML48, JesterTL and Jester TLXtra: http://zero88.com/support/index.php?/Knowledgebase/Article/View/412/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.