jexjexjex Posted October 21, 2007 Share Posted October 21, 2007 Hi All Does anyone know if the Source (Or Zoom as I think they are now) Mood Cube controller unit needs a DMX "reverser" jump lead to operate? The controller unit runs on 3pin DMX and, although I've got a couple of 5-3 pin convertors, I don't know if this unit is like the old Martin kit where the pins are reversed. All ideas gratefully appreciated. Link to comment Share on other sites More sharing options...
Trunker Posted October 21, 2007 Share Posted October 21, 2007 I wouldn't have thought it would be a reverse lead. I thought DMX was a standard uniform now and had one way of wiring!? I may be wrong!? Would it harm any of the equipment to try and see if it works? I am 95% sure though that Zoom are 'standard' DMX configurations. Link to comment Share on other sites More sharing options...
tokm Posted October 21, 2007 Share Posted October 21, 2007 It'll be standard/non phase reversed wiring :) Trunkers correct, nothing manufactured remotely recently uses phase/pins reversed wiring. HTH Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.