soundiesam Posted May 21, 2007 Share Posted May 21, 2007 Hey all, was wondering if anybody knew of anywhere I could get three 15m long RG213 cables made for sennhieser radio mics? ive searched the net and all I can find is to buy the cable and make them myself.sam Link to comment Share on other sites More sharing options...
paulears Posted May 21, 2007 Share Posted May 21, 2007 Most people do make them up, although for 15m, I'd be looking at less stiff cable - 213, is rather unwieldy, and is a problem sometimes with BNC type connectors. large gauge BNCs are quite chunky, and expensive, and the cable is so stiff that it can put quite a lot of strain on the connector on the receiver, unless you use N types (much better) with a short flexible adaptor lead to a normal size BNC/TNC to suit your radio systems. The loss on the 15m length isn't usually serious enough to make the use of large diameter feeders worthwhile. If you want some made up, there a few people on the forum who'd probably do it for you, but the freight costs alone aren't exactly cheap on heavy cable. Link to comment Share on other sites More sharing options...
StevieR Posted May 21, 2007 Share Posted May 21, 2007 Although not RG213, VDC do equivalents such as VDC URM67 Cable Assemblies And they also have more flexible version albeit with more loss VDC RG8X Cable Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.