SceneMaster Posted February 2, 2006 Share Posted February 2, 2006 I was trying to update a standard frog today from version 5.0 something software to version 10.4. I made the disk it loaded fine in the console got through all the updating then said error right at the very end as it couldn’t validate some file (I think is was a .d something file type). Does anyone have any idea why this might happen and should 10.4 software work on a standard frog? The desk is fine and reverted back to the 5.0 software. I shall also pop over to the frog forums and see if I can find anything but any help here would be much appreciated. Thanks, Link to comment Share on other sites More sharing options...
Brian Posted February 2, 2006 Share Posted February 2, 2006 This normally seems to be floppy incompatabilities. I've replaced the floppy drive on every Frog (3) I've used as they have all been not quite right. Link to comment Share on other sites More sharing options...
dogcop Posted February 3, 2006 Share Posted February 3, 2006 if you go to the zero 88 site, those helpful chaps will be only too pleased to help you. If my memory serves me correct there have been a number of posts on the same subject. Try looking herehttp://support.zero88.com/forum/index.php?...1c5be93bda0e060hope this helps Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.