paulthesteam42

My advice is always Never be scared to ask for adviceTake the safety of yourself and others seriouslyAlways come preparedDo not underestimate the value of comfortable footwear

I am pleased to say that swapping the polarity has cured the problem, Thankyou

We have two 4 channel DMX soundlab dimmers. When plugged in to either of our desks (a Zero 88 Frog,or a Zero88 jestertlxtra) I get no response. The dimmers are addressed, and I have tried numerous different addresses. The DMX indicator flashes but I get no response from them. The signal does pass through and the channel fuses are all good, any ideas?

The lamps are all halogen, The dimmer used is a Transcension UP-2 RF Dimmer Controller, purchased recently, The dimer was working as a dimmer not a relay, I have yet to try it on a betapack,

Its not the active model, its hard wired straight to a plug

Just wondering if anyone has any ideas on why I would be getting the following issue, When you increase the intensity of the dimmer channel that the Sunstrip is plugged into, instead of ramping up in the usual fashion the sunstrip appears to come on at a low intensity suddenly, in this case at around the 10% intensity mark, any ideas?

My advice on welding from work, would be inverter stick sets are a lot more user friendly in my experience. But the best way to improve the finish is really all in the preparation and choice of settings/welding electrodes.