tonyrensya Posted November 19, 2018 Share Posted November 19, 2018 Hello all expert, I'm facing a problem with my mixer.I use my mixer (Soundcraft EFX12) to output the sound source (mic + pc) to the speaker in a stage. Recently the output music from the speaker is weird. It act like there's a virtual compressor that only output the music that the volume is loud. If my music is soft at the beginning, the output will be automatically cut off the soft music, only output when the music is loud. Do any one here know what happened? Is it a setting problem of my mixer? or problem of my speakers? here is the gear and setting I use.https://drive.google...XTtDmG_dX1SNiUe Thank you very much! Link to comment Share on other sites More sharing options...
timsabre Posted November 19, 2018 Share Posted November 19, 2018 This is often caused by dirty contacts on one of your connections, or on an insert jack (not sure if that mixer has them) . Try unplugging and replugging all your connections a few times to clean the contacts. If the mixer has insert jacks on each channel, put a plug in and out of them a few times. Link to comment Share on other sites More sharing options...
sunray Posted November 19, 2018 Share Posted November 19, 2018 It looks to me that the gate threshold is set quite high (first knob for each channel) on the compander. Link to comment Share on other sites More sharing options...
timsabre Posted November 19, 2018 Share Posted November 19, 2018 It looks to me that the gate threshold is set quite high (first knob for each channel) on the compander. isn't that just gain? edit, sorry ignore me, looking at the wrong item of equipment Link to comment Share on other sites More sharing options...
MarkPAman Posted November 19, 2018 Share Posted November 19, 2018 It looks to me that the gate threshold is set quite high (first knob for each channel) on the compander. Just what I was going to say! Link to comment Share on other sites More sharing options...
tonyrensya Posted November 21, 2018 Author Share Posted November 21, 2018 Thank you all, Finally I just bypass the DBX processor, it works! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.