la grande homme Posted November 25, 2015 Share Posted November 25, 2015 Hi boys and girls,Got a venerable mac250+ that has done sterling work but is now suffering a mechanical problem. The copper pan spring is getting caught under the end stop on the fly wheel. It's OK when upright on the bench but as soon as I rig from a bar, the whole assembly drops a bit and the spring is no longer long enough to stop the end stop, instead it gets stuck under it. Any suggestions? Thanks! Link to comment Share on other sites More sharing options...
pscandrett Posted November 25, 2015 Share Posted November 25, 2015 It's a common problem - I had this on a Mac 300 some years ago and it took me a while to diagnose as it worked fine 'the right way up'! Unfortunately I can't remember what I did to fix it - I tightened all the screws holding all that assembly together, IIRC, and I think I may have also bent it a bit. Sorry if you've already tried all that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.