Jump to content

Lamp holder for Strand Prelude


Recommended Posts

As Alister says.




Not a bad job to do overall. I tend to leave the spot-welded metalwork in place and drill out the rivets into the ceramic base, then use a couple of small machine screws/washers/nuts to affix the new ceramic holder. The screws need to be something small, something like M2.5x20 (but don't hold me to that, although I could look it up on some I've done if you need).


Looks like we were chatting about Preludes (and other things) here too if you wanted any more background:





Edited by kgallen
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.