KevinE Posted February 13, 2019 Share Posted February 13, 2019 I've got a client after a fair few of these internal pop filters for the ATM89R, AT say they're discontinued...after waiting since last October for the order to arrive. Just wondering if anyone can suggest a similar alternative foam, say from a headworn mic that would fit. Originally they come glued to a diecast slip-on frame, but we have those and can always glue something over. Size of the foam itself is O.D 24mm, I.D 17mm, overall length 30mm. I've had a look on ebay but they all have very small I.ds (eg 8mm) that won't fit the little frames. Kevin pic Link to comment Share on other sites More sharing options...
Lamplighter Posted February 13, 2019 Share Posted February 13, 2019 I have had some success opening up the hole by slowly offering the foam shield to the tip of a hot soldering iron. Care is needed not to touch the foam with the tip otherwise it ruins a good tip.Clearly you need a suitable size foam shield to start with.Brian Link to comment Share on other sites More sharing options...
Cameroon Posted February 13, 2019 Share Posted February 13, 2019 Canford usually have a good selection... https://www.canford....and-pop-screens Link to comment Share on other sites More sharing options...
KevinE Posted February 13, 2019 Author Share Posted February 13, 2019 ok thanks! Never thought of them. The Sony ones look closest. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.