jason5d Posted March 19, 2018 Share Posted March 19, 2018 Hi, We have an issue with a beam 200 moving head (Chinese sharpie copy).Its pulling to the left after a hours use, Its normal after for a while after apower reset It also doesn't sit the same as the others when they are all off. Before I get it off the ceiling any thoughts where I might start looking. regards Link to comment Share on other sites More sharing options...
Don Allen Posted March 19, 2018 Share Posted March 19, 2018 Possibly damage to the pan mechanics during shipping, causing binding so pulling to the left, but more likely a dry joint on the pan opto sensor. Resoldering the pan opto sensor may be the quickest fix. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.