weazel91 Posted February 6, 2018 Share Posted February 6, 2018 Hi hive, We have some Enttec ODE MK2 nodes which won't seem to output sACN. In out network we also have Net2 nodes which run via sACN so we know out Congo (running cobalt) is spitting it out. In the network tab of the node I can see artnet in but the sACN tab shows 0 packets and last IP of 0.0.0.0. Anyone any clue as to what's going on? They work (at present) via artnet fine but wish them to work via sACN. Ta! Link to comment Share on other sites More sharing options...
James Remo Posted February 6, 2018 Share Posted February 6, 2018 Have you set the ODE to sACN mode? You need to use the NMU tool to change the mode of the node Link to comment Share on other sites More sharing options...
philis Posted February 6, 2018 Share Posted February 6, 2018 Have you set the ODE to sACN mode? You need to use the NMU tool to change the mode of the node Yes it was in sACN mode he only tried Artnet when couldn't get sACN mode to work we were using the NMU tool Thanks for the reply it can so often be something simple that has been over looked also the other nodes being used are now net3 gateways not net2 just to be clear (we do have net2 nodes but not in the network just now as trying to move to fully ACN /sACN set up to make easy for visiting companies) Link to comment Share on other sites More sharing options...
weazel91 Posted February 7, 2018 Author Share Posted February 7, 2018 Sorry, Doh! As Phil stated below Net3 Nodes,not Net2... it was a long day!Hi hive, We have some Enttec ODE MK2 nodes which won't seem to output sACN. In out network we also have Net2 nodes which run via sACN so we know out Congo (running cobalt) is spitting it out. In the network tab of the node I can see artnet in but the sACN tab shows 0 packets and last IP of 0.0.0.0. Anyone any clue as to what's going on? They work (at present) via artnet fine but wish them to work via sACN. Ta! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.